Toode on lisatud ostukorvi!

Drone|DJI|Lito 1 Fly More Combo|CP.MA.00000991

498.68€
E1
Lisa ostukorvi
Tarneaeg: 2 - 4 tp

Vajad toodet suuremas koguses või püsitellimust?

Võta ühendust meie klienditoega info[at]digipood.eu

Kuumakse al. 17.07 €. Taotle järelmaksu ostukorvis.

The omnidirectional vision system only assists flight safety under certain conditions and is not a substitute for your own judgment and control. During a flight, always pay attention to the surrounding environment and the warnings on the DJI Fly app, and be responsible for and maintain control of the drone at all times. When GNSS signals are unavailable, the optimal positioning altitude range for using the vision positioning system is 0.5 to 30 m. The vision positioning performance may decrease when flying beyond this range. Fly with caution. The vision system may not function properly when the drone is flying over water, which may prevent it from actively avoiding water surfaces below when landing. Operators should maintain control of the drone at all times, make operational decisions based on an assessment of the surrounding environment, and avoid relying solely on the vision system. The vision system cannot detect certain objects or surfaces, including large structures with frames and cables (e.g., tower cranes, high-voltage transmission towers, high-voltage transmission lines, cable-stayed bridges); surfaces with no texture or sparse texture; surfaces with repetitive identical patterns or textures (e.g., small tiles of the same color); solid-colored surfaces (e.g., pure black, pure white, pure red, pure green); strongly reflective or mirrored surfaces (e.g., ice, road signs); water or transparent surfaces; surfaces of moving objects (e.g., above moving crowds, above waving shrubs or grass); moving obstacles (e.g., walking people, moving vehicles); scenes with drastic lighting changes; surfaces that are extremely dark (e.g., less than 1 lux) or extremely bright (e.g., more than 100,000 lux); materials with strong infrared absorption or reflection properties (e.g., mirrors, glass, road signs, asphalt); small obstacles (e.g., fences, branches, power lines); and thin poles or small vertical objects (e.g., utility poles, street lamps). Do not obstruct or interfere with the sensing system under any circumstances. Ensure that all lenses remain clear, free from dirt, smudges, or other contaminants, and are not scratched. Vision system cameras may need to be calibrated after being stored for an extended period. A prompt will appear in the DJI Fly app and calibration will be performed automatically. Do not fly when it is rainy, smoggy, or the visibility is lower than 100 m. Before takeoff, inspect the sensing system's glass surfaces. Remove any protective film, stickers, or other obstructions. If water droplets, fingerprints, or smudges are present, clean the glass using a lint-free cloth. Do not use alcohol or other organic solvents. If the glass surface is loose, broken, scratched, or worn, send the drone to an authorized service center for repair. Refer to the product's user manual for more details.

The omnidirectional vision system only assists flight safety under certain conditions and is not a substitute for your own judgment and control. During a flight, always pay attention to the surrounding environment and the warnings on the DJI Fly app, and be responsible for and maintain control of the drone at all times. When GNSS signals are unavailable, the optimal positioning altitude range for using the vision positioning system is 0.5 to 30 m. The vision positioning performance may decrease when flying beyond this range. Fly with caution. The vision system may not function properly when the drone is flying over water, which may prevent it from actively avoiding water surfaces below when landing. Operators should maintain control of the drone at all times, make operational decisions based on an assessment of the surrounding environment, and avoid relying solely on the vision system. The vision system cannot detect certain objects or surfaces, including large structures with frames and cables (e.g., tower cranes, high-voltage transmission towers, high-voltage transmission lines, cable-stayed bridges); surfaces with no texture or sparse texture; surfaces with repetitive identical patterns or textures (e.g., small tiles of the same color); solid-colored surfaces (e.g., pure black, pure white, pure red, pure green); strongly reflective or mirrored surfaces (e.g., ice, road signs); water or transparent surfaces; surfaces of moving objects (e.g., above moving crowds, above waving shrubs or grass); moving obstacles (e.g., walking people, moving vehicles); scenes with drastic lighting changes; surfaces that are extremely dark (e.g., less than 1 lux) or extremely bright (e.g., more than 100,000 lux); materials with strong infrared absorption or reflection properties (e.g., mirrors, glass, road signs, asphalt); small obstacles (e.g., fences, branches, power lines); and thin poles or small vertical objects (e.g., utility poles, street lamps). Do not obstruct or interfere with the sensing system under any circumstances. Ensure that all lenses remain clear, free from dirt, smudges, or other contaminants, and are not scratched. Vision system cameras may need to be calibrated after being stored for an extended period. A prompt will appear in the DJI Fly app and calibration will be performed automatically. Do not fly when it is rainy, smoggy, or the visibility is lower than 100 m. Before takeoff, inspect the sensing system's glass surfaces. Remove any protective film, stickers, or other obstructions. If water droplets, fingerprints, or smudges are present, clean the glass using a lint-free cloth. Do not use alcohol or other organic solvents. If the glass surface is loose, broken, scratched, or worn, send the drone to an authorized service center for repair. Refer to the product's user manual for more details.
2. ActiveTrack can work properly only when certain flight conditions are met. See Footnote 1 to ensure the omnidirectional vision system is normal and avoid flying in the following environments or conditions: DO NOT fly in severe weather conditions, such as in strong winds (wind speed of more than 10.7 m/s), snow, rain, lightning, or fog. DO NOT fly the drone 4500 m or higher above sea level. DO NOT fly the drone in environments where the temperature is below 0° C (32° F) or above 40° C (104° F). DO NOT take off from moving objects, such as cars or boats. DO NOT fly close to reflective surfaces such as water or snow. Otherwise, the vision system may not work correctly. The vision system may not work properly in dim environments. Always fly with caution and prevent the drone from entering Attitude mode. DO NOT fly near areas with magnetic or radio interference. Common magnetic or radio interference sources include Wi-Fi hotspots, routers, Bluetooth devices, high-voltage lines, large-scale power transmission stations, radar stations, mobile base stations, and broadcasting towers. Avoid sand entering the drone when taking off in desert or beach areas. Fly the drone in open areas away from crowds. Buildings, mountains, and trees may block the GNSS signal and affect the onboard compass.

Standard video recording supports up to 4K/60fps, and slow-motion video recording supports up to 4K/100fps.

Photo resolution can reach up to 8K (48 MP). When the resolution is 8K (48 MP), SmartPhoto is unavailable. When the resolution is 4K (12 MP), SmartPhoto can be automatically enabled to apply algorithmic beautification.

The actual product weight may vary due to differences in batch materials and external factors. Training or examination is not required for flying this product in most countries and regions. With the Intelligent Flight Battery Plus, the aircraft will weigh more than 249 g. Always check local laws and regulations before use.

Using the Intelligent Flight Battery, the maximum flight time is 36 minutes. This is measured in a controlled wind tunnel environment under conditions equivalent to windless operation and sea-level altitude, with the drone flying forward at a constant speed of 21.6 kph, Obstacle Avoidance Action set to Brake and in photo mode, until forced landing due to battery depletion. The Intelligent Flight Battery Plus extends the flight time to 52 minutes when flying forward at a constant speed of 21.6 kph. However, the Intelligent Flight Battery Plus is not included in the combo. If needed, purchase it separately. Please note that the Intelligent Flight Battery Plus is not supported by this product in the EU or the UK. Always comply with local laws and regulations before flying.

Measured in an open outdoor environment without interference and with IC compliance. The above data shows the farthest communication range for one-way, non-return flights. Always pay attention to RTH reminders in the DJI Fly app during your flight.

Tootja DJI
Tootekood CP.MA.00000991
EAN 6937224146839
Google link lisainfo
Garantiiaeg 24 kuud
.: Üldised andmed :.
Seadme tüüp Quadcopter
Tootja koduleht https://www.dji.com/uk
.: Disain :.
Toote värv Grey
.: Mälu :.
Ühilduvad mälukaardid MicroSDXC
.: Võrgustumine :.
WiFi Jah
WiFi-standardid 802.11a/802.11b/802.11g/Wi-Fi 4 (802.11n)/Wi-Fi 5 (802.11ac)/Wi-Fi 6 (802.11ax)
Bluetooth Jah
Bluetoothi versioon 5.4
.: Aku & Toiteallikas :.
Akutehnoloogia Lithium-Ion (Li-Ion)
Aku mahutavus 18.96 Wh
Antenn
Antennide arv 2
Multimeedia
Sisseehitatud kaamera Jah
Funktsioonid
Maximum flight time 36 min
Mudeli originaalnimi Lito 1 Fly More Combo
Logistika andmed
Kogus transpordikasti kohta 4
Töötingimused
Kasutamistemperatuur (T-T) 0 - 40 °C
.: Pakendi andmed :.
Kaablid kaasa arvatud RC
Screwdriver included Jah
Carrying case Jah
Memory card slot(s) Jah
Battery operated Jah
Easy to use Jah
Moving control functions Backward/Downward/Forward/Lateral/Upward
Number of rotors 4 rotors
Bitrate at maximum video resolution 130 Mbit/s
Unit Box Height 0.19
Unit Box Length 0.135
Unit Box Width 0.24
Unit Calculated Volume 0.01079 cubm
Unit Calculated Weight 1.64 kg
Maximum flight altitude 4500 m
Maximum wind resistance 10.7 m/s
Number of propeller blades 2
Megapixel (approx.) 48 MP
Lowest latency 120 ms
Maximum control speed (tilt) 100 °/sec
Mechanical pan range -30 - 30 °
Maximum pitch angular velocity 35 °/sec
Mechanical roll range -49 - 49 °
Mechanical tilt range -126 - 67 °
Gimbal protector Jah
Remote control included Jah
GPS (satellite) Jah
Image formats supported JPEG/Raw
Maximum aperture number 1.8
Sensor type CMOS
Video formats supported AVC/H.264/HEVC/H.265/MP4/MPEG4
Battery voltage 7.32 V
Camera shutter speed 1/8000-2 s
Field of view (FOV) angle 79 °
Foldable Jah
Maximum ascent speed 7 m/s
Maximum descent speed 7 m/s
Maximum frame rate 60 fps
Maximum memory card size 1000 GB
Maximum operating distance 20000 m
Maximum video resolution 3840 x 2160 pixels
Optical sensor size 1/2 "
Video resolutions 1920 x 1080/3840 x 2160 pixels
Laius 251 mm
Sügavus 183 mm
Kõrgus 79 mm
Toote kaal 249 g

Digipood.eu keskonnast ostetud toodetele pakume järgnevaid kättesaamise ja kohaletoimetamise viise.


Kohaletoimetamise viis Kellaajad/info Maksumus

Tulen ise kaubale järgiTulen ise kaubale järele
Condor OÜ kesklattu

Tarne aeg asub "Lisa Ostukorvi nupu all"

  • E-R kella 10-18
  • L kella 10-15
  • P suletud
Tasuta

Tarned pakipunktidesse

Tarne aeg asub "Lisa Ostukorvi nupu all"

Kättesaamise koha valib kasutaja tarneviisi valimisel.
Kättesaamise aeg pakiautomaadist või pick-up punktist sõltub teenusepakkujast

Omniva

Alates 2.50 €
Alates ostusummast
200€ tarne tasuta

Pakkide väljastamine pakiautomaadist 24/7

Digipood.eu valikul

 

Saadetis otse postkasti, pakume seda võimalust nt mälupulkadele, mälukaartidele jne.
Kui klient on valinud selle saatmisviisi ning saatmine pole võimalik võtame teiega ühendust ning lepime kokku teise saatmisviisi.
2.00€