Toote on läbimüüdud kuid võimalik tellida, tellimiseks võta ühendust meie klienditoega info[at]digipood.eu
The device has a special heated FF-LEX table, Turbine, instantly cooling prints near the head, Intelligent temperature control system, Internal memory, Printer works very quietly, no louder than 45 dB
| Tootja | GEMBIRD |
| Tootekood | FF-3DP-1NA3-01 |
| Google link | lisainfo |
| Garantiiaeg | 24 kuud |
| .: Üldised omadused :. | |
| Printimistehnoloogia | fff |
| Printimistehnoloogia | FFF |
| Toide | |
| Toiteallikas | Internal |
| Toiteallikas | internal |
| .: Toetatud operatsioonisüsteemid :. | |
| Toetatud Windowsi operatsioonisüsteemid | Windows XP / Vista / 7 / 8, Windows 10 |
| .: Kaal ja mõõtmed :. | |
| Brutokaal | 9 kg |
| Muud andmed | |
| Additional covers | Ei |
| Additional information about warranty | 12 month |
| Adjustable speed of device operation | Ei |
| Adjustable temperature of the printing nozzle | Ei |
| AutoSave | Ei |
| Constuctional elements printed on a 3D printer | Ei |
| Device size - depth (y) | 340 mm |
| Device size - height (z) | 405 mm |
| Device size - width (x) | 388 mm |
| Filament diameter | 1.75 mm |
| Filament type | ABS, PLA, PVA, PVA, HIPS, Nylon, Rubber |
| Filament type | ABS, PLA, PVA, Nylon |
| Firmware | Flashforge |
| Heated working chamber | Ei |
| Heating of a working platform | Jah |
| Interfaces (connectors) | USB, Wi-Fi |
| Marking of the hot areas | Ei |
| Max. Depth of the printed object (y) | 150 mm |
| Max. Height of the printed object (z) | 150 mm |
| Max. Width of the printed object (x) | 150 mm |
| Maximum operating temperature of the head | 240 °C |
| Maximum operating temperature of the platform | 100 °C |
| Nozzle diameter | 0.4 mm |
| Overheat protection | Ei |
| Protection of electronics against damage | Ei |
| Recommended filament producer | Gembird |
| Set type | Ready to work |
| Software compatibility in particular systems | Ei |
| Software Included | Flashprint |
| Speed of printing | 111 mm/s |
| Standard printhead/extrusion head | single |
| Standard printhead/extrusion head | Single |
| Supported file formats | STL, .3MF, OBJ, FPP, BMP, PNG, JPG, JPEG |
| Thickness of the walls the printed object min-max | 0,05-0,4 mm |
| Type of printer housing | Closed |
| Type of software | Dedicated |
| X Axis positioning resolution | 0.011 mm |
| Y Axis positioning resolution | 0.011 mm |
| Z Axis positioning resolution | 0,0025 mm |
Digipood.eu keskonnast ostetud toodetele pakume järgnevaid kättesaamise ja kohaletoimetamise viise.
| Kohaletoimetamise viis | Kellaajad/info | Maksumus | ||
|---|---|---|---|---|
|
|
Tarne aeg asub "Lisa Ostukorvi nupu all"
|
Tasuta | ||
|
Tarned pakipunktidesse |
Tarne aeg asub "Lisa Ostukorvi nupu all" Kättesaamise koha valib kasutaja tarneviisi valimisel.
|
|||
|
Digipood.eu valikul
|
Saadetis otse postkasti, pakume seda võimalust nt mälupulkadele, mälukaartidele jne. Kui klient on valinud selle saatmisviisi ning saatmine pole võimalik võtame teiega ühendust ning lepime kokku teise saatmisviisi. |
2.00€ | ||
Tulen ise kaubale järele
